CNC waterjet glass cutting machine are the most flexible and cost-effective cutting machine available. As the leader provier of waterjet cutting machine, APW's objective was to harness state-of-the-art technologies to make high-pressure abrasive jet machining practical, affordable, and easy to use.
All-powerful Science & Technology Stock Co.,Ltd, a sino-US joint venture, which was established at 2001 and located in the Export Processing Zone of Liaoning Provence, All-powerful is the largest new high-tech enterprise integrated the reserch and development of cnc waterjet glass cutting machine, and an important base for developing high-end ultral-high pressure water jet industry of china.
Our mission is to help our customers solve their manufacturing challenges and achieve their highest level of productivity,precision and accuracy.
CNC waterjet glass cutting machine can cut almost any material. Pure water jets can quickly and accurately cut soft materials such as rubber, foam and other gasket material. Abrasive water jets can cut almost any other material over a very wide range of thichness.
The features cnc glass cutting machine
1 It does not cause heat effect or detormation or tiny cracks
2 It can cut any complex and flat figures
3 Narrow kerfs
4 Smooth incision
5 Minimize dust and toxic fumes, provice healthier working environment
6 It can be adjested easily and quickly by the designs and materials
7 Low processing cost in unit time
8 Components are of high quality and spare parts are cheap
9 Drilling holes to avoid water permeate the composite materials
10 Reduce setting time and fixture cost
There are four parts in our waterjet glass cutting machine. They are intensifier pump; cutting table; CNC controller and Auto abrasive feeder.
|
A waterjet glass cutting machine is made up of 4 key components, that is Intensifier pump; Cutting table; CNC controller; Auto abrasive feeder. |
Intensifier Pump |
Max. water pressure |
410Mpa |
Continuous working pressure |
360-380Mpa |
Max. oil pressure |
20Mpa |
Motor power |
37KW/50HP |
Cutting water inlet pressure |
0.3Mpa |
Cooling water inlet pressure |
0.3Mpa |
Power supply |
380V/50HZ/3PH |
Max. flow rate |
3.7L/Min |
Oil tank volum |
30Gal.(114L) |
Cutting Table |
Structural style |
Cantilever style |
Cutting area |
2000x1000x150mm |
Max. moving speed for X/Y-axis |
6000mm/min |
Max. moving speed for Z-axis |
1000mm/min |
Load bearing |
500kg/ Squre meter |
Control accuracy |
0.01mm |
Cutting accuracy |
0.1mm |
Power supply |
220V |
Way of drive |
AC Servo |
X/Y-axis structure |
Aluminum structure |
Cutting Head |
Mode |
3-axis |
Max. orifice diameter |
0.33mm |
Max. nozzle diameter |
1.02mm |
Z-axis step motor |
0.9N.M |
CNC Controller |
15 inch LCD monitor |
Support DXF and NC code file |
Software: Windows XP |
Resistance of the shoch and electro-magnetic |
The key function |
Forward & backward processing function |
Even pace control function |
Small arcs speed auto processing function |
Circle processing function |
Partial and smooth processing modes |
Abrasive Feeder |
Max. inlet air pressure |
0.6Mpa |
Min. inlet air flow |
0.028m3/min |
Abrasive capacity |
225KG |
Features |
Air valve to prevent jams and breakages |
Self sealing |
Auto control with CNC auxiliary function |
Slightly adjust the flow |
Imported components
We adopt the imported component of cnc waterjet glass cutting machine like Rexroth hydraulic pump; USA intensifier; Siemens motor;Omron PLC; Yaskawa servo drive; Yuken direction control valves etc. The whole parts of Intensifier are assembled in USA (not just some parts), most of the smaller parts are also imported from USA to ensure its good stability during cutting, durability and long working service life.